Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me configure Altera SRAM based FPGA

Status
Not open for further replies.

leonqin

Full Member level 4
Joined
Nov 7, 2001
Messages
238
Helped
5
Reputation
10
Reaction score
3
Trophy points
1,298
Location
China
Activity points
1,763
config problem

I want to config Altera sram based FPGA (ex ACEX series) with AVR MCU+EEPROM by ps mode,
because the smallest AVR mcu only have 6 IOs,and clk need 1,
so I think I may tie e2prom's clk whith fpga's DCLK,tie e2prom's Dout with
fpga's data0,
I wang to see if it alwayes config successfully when I low nConfig,I first feed some
dummy bits before the valid config data,and then feed right data.
sorry for my poor english.
 

synq

Member level 2
Joined
May 21, 2001
Messages
51
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
446
config

thiere is no problem in doing so...

what u seeing is a garbage data which can be cleared by feeding at a lower download rate..
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top