Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
if your project is simulation, you can use MATLAB for simulating the whole project. but if it is implementation, for creating the communication part of the wimax protocol, it's best if you use VHDL or Verilog. but also for the video part you need to use C++ or similar computer languages to encode or decode the transmitting and receiving the video.