Help in finding toggle switch in orcad capture

[dor8]

I cant find in my capture toggle switch ( on - off - on) .
I searched in folders in orcad Components and i could not find the switch i went.
If somebody please help me find or send me a link to it very help me

 

[Velkarn]

use a combination of VPULSE (library "source") and S (library "analog")

 

[dor8]

I want it only for electrical sketching and not for simulation.
That's why I need only the symbol

 

[spudboy488]

They are pretty simple to make yourself. Have you tried? What I did was to take a SPDT switch from the discrete library, remove the diagonal line that went to the NC position and added a horizontal line from the common to a point between the 2 contacts. Then save it to your own library.

 

[dor8]

They are pretty simple to make yourself. Have you tried? What I did was to take a SPDT switch from the discrete library, remove the diagonal line that went to the NC position and added a horizontal line from the common to a point between the 2 contacts. Then save it to your own library.

View attachment 107904

this is what i went to do, but i dont know how

 

[spudboy488]

From Capture:

File -> Open -> Library
Navigate to Orcad/tools/capture/library and open Discrete.olb
Open symbol SW DPDT
Remove the diagonal line that went to the NC position'
Add a horizontal line from the common to a point between the 2 contacts.
Save it to your own library with a different name..

 

[dor8]

From Capture:

File -> Open -> Library
Navigate to Orcad/tools/capture/library and open Discrete.olb
Open symbol SW DPDT
Remove the diagonal line that went to the NC position'
Add a horizontal line from the common to a point between the 2 contacts.
Save it to your own library with a different name..

Thank you ....