Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help for multi serial port

Status
Not open for further replies.

ifithegr8

Member level 1
Joined
Jan 26, 2009
Messages
34
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
Pakistan
Activity points
1,485
serial to multiserial

i have three devices that transmit data continously and i have to send that data to computer's Serial port.

i tried to use HEF4067 multiplexer but failed. Problem was that wether i connect one device to any input data was transmitted.even my mux was not powered data was recived by the PC so is there any way i can recive multiple data
 

try plugging more serial ports and assigning appropriate addresses to them. Most PC will take in 4 serial ports.
 

you mean that i have to install 4 comports??
is there any hardware possiablities using 8051
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top