Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help about Cohesion's attribute visibility

Status
Not open for further replies.

z17us

Junior Member level 2
Joined
Mar 25, 2003
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
266
Hi,

I have a simple transistor level schematic in Cohesion. Can somebody tell me how can I make visible not only the value of an attribute, but also its name. For example now as Width/Length values I have “5u/1u”, but what I want is: “W=5u/L=1u”.

Thanks.
 

z17us

Junior Member level 2
Joined
Mar 25, 2003
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
266
Hi again,

I have not got any replies. Obviously somehow the quote symbol did not show up correctly. The correct sentence follows:

For example now as Width/Length values I have (5u/1u), but what I want is: (W=5u/L=1u).

I also have encountered another problem. I have added another attribute: (nfing) for the number of fingers per MOS transistors, but somehow it did not appear on the netlist.

Hopefully somebody could help me with these problems.

Bye.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top