I have two Silicon Sensing CRS03 gyroscopic sensors, CRS03 (packaged) - Silicon Sensing
is the link to the product and technical documents.
I basically need to design a circuit that when one gyroscope tilts, lets say along the x axis (assuming the axis is going out of the computer), that it sends the signal to a linear actuator and moves the actuator out, and when it tilts the other direction, still along the x-axis, it will send another signal to the same linear actuator to move the actuator arm in.
Incase that was confusing, basically I want the actuator to move out when the gyro tilts left, and the actuator to move in when the gyro tilts right.
I know these gyro's can do that because the sales representative at Silicon Sensing assured me of it. But I'm not really sure how to design this circuit. I don't know much about actuators, gyros, or reversing polarity and what not. Basically I am capable of making the part to drop the input Voltage from 12V to 5V, as is the operating Voltage of these Gyros..
Any and all help is appreciated, thanks!