May 4, 2019 #1 V venkates2218 Full Member level 6 Joined Sep 30, 2016 Messages 354 Helped 1 Reputation 2 Reaction score 1 Trophy points 1,298 Activity points 4,306 In schematic SIZE=2.540 MM,MULTIPLE=1,ALT=0.3175 In Board SIZE=1.27MM,MULTIPLE=1,ALT=0.158 If I changed the SIZE=1.271MM in board means the above error is showing in the schematic. how to solve this error..?
In schematic SIZE=2.540 MM,MULTIPLE=1,ALT=0.3175 In Board SIZE=1.27MM,MULTIPLE=1,ALT=0.158 If I changed the SIZE=1.271MM in board means the above error is showing in the schematic. how to solve this error..?
May 4, 2019 #2 W wwfeldman Advanced Member level 4 Joined Jan 25, 2019 Messages 1,101 Helped 231 Reputation 461 Reaction score 297 Trophy points 83 Activity points 8,554 1.27 mm is 0.050 inches, or 50 mils. i believe eagle "thinks" in inches, not meters 1.271 mm is 0.050039 inches, or 50.0039 mils it is a computer. it has a threshold check for "coarse" layout grid. you can remove this warning (yellow triangle is a warning, not an error) by going back to 1.27 mm, or you can ignore it. on a different note, why would you make such a tiny change?
1.27 mm is 0.050 inches, or 50 mils. i believe eagle "thinks" in inches, not meters 1.271 mm is 0.050039 inches, or 50.0039 mils it is a computer. it has a threshold check for "coarse" layout grid. you can remove this warning (yellow triangle is a warning, not an error) by going back to 1.27 mm, or you can ignore it. on a different note, why would you make such a tiny change?