Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

GPRS and GPS antenna's on PCB

Status
Not open for further replies.
T

techie

Advanced Member level 3
Advanced Member level 3
Joined
Feb 5, 2002
Messages
839
Helped
58
Reputation
116
Reaction score
9
Trophy points
1,298
Location
Pakistan
Activity points
7,805
Can anyone suggest how I can make a simple GPRS and GPS antenna on PCB. I have modules of both GPS and GPRS with RF pads and want to make simple antenna's (maynot be very sensitive) on the PCB rather than using an off-the-shelf antenna.
 

I found it on" the compact broadband microstrip antenna"
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top