sam536
Full Member level 5

glitch detection
Hi,
I have circuit as attached here. Is there any way we can find out the glitch curcuit in RTL using spyglass/conformal/Debussy or etc. I am looking for schematic to see for my design where ever glitch may occur.
Problem :
There are Three FFS(FF1,FF2,FF3). FF1 is driving with clk1 and FF2 and FF3 are driving with clk2. The input to the FF3 is from FF2 as well as FF1 as shown in the fig. Can i find such type in RTL and report it with any tools.
Your inputs are appreciated.
Regards,
Sam
Hi,
I have circuit as attached here. Is there any way we can find out the glitch curcuit in RTL using spyglass/conformal/Debussy or etc. I am looking for schematic to see for my design where ever glitch may occur.
Problem :
There are Three FFS(FF1,FF2,FF3). FF1 is driving with clk1 and FF2 and FF3 are driving with clk2. The input to the FF3 is from FF2 as well as FF1 as shown in the fig. Can i find such type in RTL and report it with any tools.
Your inputs are appreciated.
Regards,
Sam