Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

freqeuncy and phase sensitivity

Status
Not open for further replies.
kf is a constant and is expressed in Hz/V (or rad/V in case of phase modulation, kp). It is very similar with the VCO gain which also is expressed in Hz/V, with the difference that kf is the instantaneous value of the frequency that is linearly modulated by the voice or by the baseband signal. To find its value have to know the frequency deviation (Δf) of the FM signal.
kf = Δf/A ; where Δf is the deviation frequency and A is the amplitude of the modulation signal.
kf have large values for Wide-FM modulations, and low values for Narrow-FM modulations.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top