Try w*w.csr.com/products/examples.htm. You'll need to register.
Don't take any crap from them as they sometimes are stingy about
giving out information.
Try w*w.csr.com/products/examples.htm. You'll need to register.
Don't take any crap from them as they sometimes are stingy about
giving out information.
Hi,
I've got the free Headset design guide form CSR and follow the schematics to a BC*02 module. It can only operate pair process. After paring process, the module seems die(sleep?)!! I remember the button circuit applied to BC*01 must be modified for wakeing up the chip. IS it the same situation? Somebody give me a hint!
THX
Jim
Long time no post.
How did you get on with your BT design?.
The best thing to do about your problem is to email the CSR tech support.
They will reply to your email and hopefully have an answer for you.
Have you tried your design in a Casira or have you designed everything from scratch? I have tried the CSR headset design and it works well.
It is false economy if you've started everything from scratch.
The CSR BC2 external headset design is in production and does work.
The sam edsign has been copied and manufactured by at least a dozen headset makers and they all have it working as well.
Hi, all
It's been a long time for looking your information , good to see you
I've sloved my problem about the headset.
One of the problem is the size of flash memory due to the
new version of Blue*lab ... ...
Thanks
Jim