Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

FPGA related question.ALTERA kit is used

Status
Not open for further replies.

creative_smart88

Newbie level 4
Newbie level 4
Joined
Dec 9, 2012
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,322
hii,

do u know the technique of converting Simulink model into verilog HDL program.

i have a simulink model of channel coding. i want to convert it to Verilog HDL code.

please i need help in this.
 

Mathworks provide an HDL coder tool that could do what you want (if the simulink model is suitable - not all simulink blocks are convertable) - you have to pay for it though.

Otherwise you have to write the code yourself.
 

hii,

hope u r fine.

actually i need to my term project in FPGA.
i dont know the verilog coding.
so i am thinking to do it in simulink and then need to convert it to verilog code.

can u please help me in my term project.

regards,
creativesmart88@gmail.com
 
Last edited:

no sir i did not get it.
its asking for purchase of software which converts simulink model to verilog HDL.

please help me in this regard.
 

I suggest you pay for it or write the HDL yourself. They are your only 2 options.
 

hii,
can any one help me by providing me sample models of simulink using dsp builder in channel coding or filter design.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top