Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Fluke 99B Move Button moves Right, not Left

Status
Not open for further replies.

davidjmessing

Newbie level 1
Joined
Sep 8, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Nebraska City, NE
Activity points
1,289
fluke 99b

On a Fluke 99B Scopemeter the Move Button moves the screen to the right, not to the left. I removed the meter from the case and cleaned the pads and buttons, no improvement. Visiting with a friend over the holiday, I learned his 99B has the excact same issue. Doing a reset, the screen will move left. This problem doesn't allow review of a recorded waveform. It will not scroll to the left. Was wondering if a replacement of electrolytics would solve the problem?

Also, what is the recommended probe replacement for this meter? The steel wire has broken on two of the probes. davidjmessing(remove)@gmail.com

Dave
 

octane

Newbie level 1
Joined
Aug 31, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,284
Hi Dave,

I've resolved repairing the keyboard membrane with a bit of conductive paint.
I had problems with 4 key and now all works perfectly.

Federico
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top