Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

floating node error in pspice

Status
Not open for further replies.
Z

zahedi5165

Newbie level 2
Joined
Feb 18, 2010
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
iran
Activity points
1,294
hi.
I have problem in my circuit. I drew my circuit in pspice but it do not work and has error please help.

ERROR -- Node N00868 is floating
ERROR -- Node N00151 is floating
ERROR -- Node N000030 is floating
ERROR -- Node N00023 is floating.....
 

The gates of M7 and M8 don't go anywhere. Fix that then see what happens.

Keith.
 

    Z

    zahedi5165

    Points: 2
    Helpful Answer Positive Rating
Hi,

Try by searching for nodes N00868, N00151 etc in the schematic. It is possible that they are not connected to the point you intend them to; they seem to have remained unconnected.
 

    Z

    zahedi5165

    Points: 2
    Helpful Answer Positive Rating
keith1200rs said:
The gates of M7 and M8 don't go anywhere. Fix that then see what happens.

Keith.
Click to expand...

I do . but it has same error .
 

Post the output file or netlist - I might be able to spot the problem. What is it drawn with?

Keith.
 

hi,

Double click the ground element and replace its name by 0...

You wil get it ryt...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top