Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Flash Programmer Plug-In problem

Status
Not open for further replies.

bartl

Newbie level 1
Joined
Feb 13, 2006
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
Hi all,

I am trying to program a TMS320F2801 DSP, using the On-Chip Flash
Programmer Plug-In v1.12.0 for CCS_v3.1 with the XDS510usb emulator. But
when I open de Flash Programmer Plug-In, all buttons are disabled except
the unlock button. Nevertheless the CPU I am using is new so now password
can be programmed. To be 100% sure I replaced the CPU by another new CPU
and the same problem occurred.

Is there something I am forgetting? Could it be a setting in the plug-in
or in my source code?
 

Unomano

Member level 1
Joined
Aug 31, 2005
Messages
40
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,288
Location
Minsk, Belarus
Activity points
1,613
Refer to "Running an Application from Internal Flash Memory on
the TMS320F28xx DSP" (SPRA958F TI documentation), probably it will help you.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top