Flash firmware via CAN

[Matteo Martinelli]

Hi,
I'm using ICD3 to flash my firmware in dspic30f5013 but now I'm coding a bootloader that allows me to load the built-firmware (.hex) via canbus through my IDE developed in C#.

I must write .hex file only in Program memory ???

Thanks.

 

[bigdogguru]

I must write .hex file only in Program memory ???

Application Code => Flash Memory
EEPROM Values => EEPROM
Configuration Settings => Configuration Registers

Examine the following for more info:

AN1094 Bootloader for dsPIC30F/33F and PIC24F/24H Devices

A similar CAN bootloader is available for the PIC18 family:

AN247 A CAN Bootloader for PIC18F CAN Microcontrollers


BigDog