Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Fiber Optic Patch Cord SPlicing

Status
Not open for further replies.
G

geoff1985

Newbie level 6
Joined
Nov 13, 2012
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,342
Hi Sirs,

I have a problem, I purchase LC type patchcord but lately to found out that i need an SC patch Cord.
THe total lenght is approximately 100meters.
Is it possible to splice the FO patchcord (LC type) to pigtail (SC type)??
Thank you.
 

Yes ... the patch cord and the pigtail can be spliced together... considering both fibers are either SM or MM. the end connector doesn't effect the splice
 

would it be possible Sir if i will just use an adaptor instead of splicing?
 

lc to sc adapter can be used.... but try to buy one with loss <= 3dB
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top