Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Error in pardiso back substitution

Status
Not open for further replies.
G

gustavolsilvano

Newbie level 4
Joined
Jul 11, 2011
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,336
I was simulating a cylinder of copper in the free space, but it gave an error when it was, during the simulation, convergin the erro.
The erro was "Error in pardiso back substitution"
The software was Comsol 3.6
Thanks
 

gustavolsilvano said:
I was simulating a cylinder of copper in the free space, but it gave an error when it was, during the simulation, convergin the erro.
The erro was "Error in pardiso back substitution"
The software was Comsol 3.6
Thanks
Click to expand...


If you change the "lambda0" or free space wavelength to a larger value it will get past this error but it then is solving for a different frequency. Also the port area needs to be a ~100 times smaller than the wavelength.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top