Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Error: File name too long : Building linux-xilinx kernel

Status
Not open for further replies.

deboleena18

Newbie level 4
Joined
Jun 20, 2013
Messages
6
Helped
2
Reputation
4
Reaction score
2
Trophy points
3
Location
India
Activity points
44
hi i m getting the following error, irrespective of the make target

this is just one example with target as clean



droy@m4210-01 ~/linux-xlnx-master $ make ARCH=microblaze clean

scripts/Makefile.clean:17: /home/droy/linux-xlnx-master/drivers/net/ethernet/smsc/Makefile: File name too long
make[4]: stat: /home/droy/linux-xlnx-master/drivers/net/ethernet/smsc/Makefile: File name too long
make[4]: *** No rule to make target `/home/droy/linux-xlnx-master/drivers/net/ethernet/smsc/Makefile'. Stop.
make[3]: *** [drivers/net/ethernet/smsc] Error 2
make[2]: *** [drivers/net/ethernet] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [_clean_drivers] Error 2



additional info

downloaded linux-xilinx kernel from xilinx github

board - ml509 (xupv5lx110t)



this is my first time with linux on fpga´s, so please tell me what i m missing and what can be d
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top