Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Equalization Problem: Where to start from?

Status
Not open for further replies.
X

xplore29

Newbie level 3
Joined
Feb 24, 2012
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,309
Hi All

Where should one start from if one wants to address "equalization problem".......Equalization is required to compensate for channel distortion so i guess one should first select the channel model ...... come up with channel impulse response and look for relationship between the noise added by the channel and the ISI caused by the channel.....

Thanku.....
 

You have to estimate the channel first then equalize it, many algorithm already exist: ZF, MMSE, DFE, ..etc
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top