Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Electronic system design

Status
Not open for further replies.

amnon

Junior Member level 2
Joined
Dec 13, 2005
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,461
Hello,

Does anyone here knows a good site for learning system design?

What I mean is, all the books tells you how to design mixers, amplifiers, lna's and Vco's, but I never encoutered a site which tells you in the system manner

For example, power management - can we share one voltage regulator to amplifier and oscillators at once ? is decoupling capacitor enough?
what is the disadvantage of combining several amplifiers ? (except the IP3,P1dB) but In the aspect of maybe noise amplification?
In analog and digital circuit - suppose the digital section feeds the analog section with some digital bits (for example, to determine gain of an amplifier)
does the digital bits needs to pass with a buffer? connecting it without a buffer is sufficiently enough?

these issues are critical in every design and not always you know what is the right descision.

So...does anyone knows a good site for this? it can be a course in some university even...

Thanks,
Amnon
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top