saeed_pk
Full Member level 4
- Joined
- May 20, 2006
- Messages
- 237
- Helped
- 35
- Reputation
- 68
- Reaction score
- 28
- Trophy points
- 1,308
- Location
- Islamabad, Pakistan
- Activity points
- 2,655
Hi alls,
I am using an ESC from TAMIYA with PIC16F877A OF A Toy Car. I had control its servos but unable to get any response from ESC . my design does not contain RC son don't be confused about it.
I have following issues!
- When i Power up ESC with Battery it does not give any response
- When i apply 5V to ESC another power pin( That might be for RC
Reciever) it starts beep.................. beep...beep...beep
- I applied a 489 Hz PWM with 50-90 % Duty Cycle NO RESPONSE
I checked motor separately which is fine.
Please Help me out!
I am using an ESC from TAMIYA with PIC16F877A OF A Toy Car. I had control its servos but unable to get any response from ESC . my design does not contain RC son don't be confused about it.
I have following issues!
- When i Power up ESC with Battery it does not give any response
- When i apply 5V to ESC another power pin( That might be for RC
Reciever) it starts beep.................. beep...beep...beep
- I applied a 489 Hz PWM with 50-90 % Duty Cycle NO RESPONSE
I checked motor separately which is fine.
Please Help me out!