Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

electrical equivalent

Status
Not open for further replies.

akash reddy

Newbie level 4
Newbie level 4
Joined
Jan 22, 2013
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,327
What would the electrical equivalent circuit of a freely falling body look like and how would we relate the R, L and C in the circuit to the mechanical parameters of the body..??
 

A freely falling body drops slowly at first, then gains more speed over time. Its curve is exponential.

The C and L curves drop quickly at first, then become shallower over time. They are linear devices (as far as the ideal sense).

Consider a diode. As voltage increases linearly, current goes up exponentially. It might better describe a falling body.

- - - Updated - - -

Or a battery as it discharges into a load. Volt level falls slowly at first, then quickly as it gets completely discharged.
 

try to think a DC battery connected to an inductor and measure the current.
In an ideal word the current will go to infinite, in a real word the current will be limited by the internal resistance of the battery and of the inductor.
think at he current as the speed of the falling person.

Mandi
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top