Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

EEPROM interfacing with 89s52

Status
Not open for further replies.

anboli

Full Member level 2
Full Member level 2
Joined
Mar 9, 2012
Messages
144
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,298
Visit site
Activity points
2,513
hi,

im interfacing DS1307(RTC ic) and AT24c02(for memory) with at89s52, i had given the SCL and SDA separately to both the IC.

whether we can give like that or i need to give separately.

and i having the problem with memory ic, but no problem with RTC.

i can read the time from RTC but cant loading the data from memory..

//************************************************************************//
//
// North_Green = N_G
// South_Green = S_G
// East_Green = E_G
//
//
//
//
//



#include<at89x52.h>
#include"i2c_rtc.h"
#include"i2c_eeprom.h"



sbit SET = P1^0;
sbit INC = P1^1;
sbit DEC = P1^2;
sbit OK = P1^3;

sbit N_G = P1^4;
sbit E_G = P1^5;
sbit W_G = P1^6;
sbit S_G = P1^7;

sbit N_R = P2^0;
sbit E_R = P2^1;
sbit W_R = P2^2;
sbit S_R = P2^3;

sbit N_Y = P2^4;
sbit E_Y = P2^5;
sbit W_Y = P2^6;
sbit S_Y = P2^7;



unsigned char North_green,East_green,West_green,South_green;
int c,d;
unsigned char Sc,Mn,Hr,value1;
unsigned char north,south,east,west;


//*****************************************************************************//
void delay(unsigned int count);
void disp_north(unsigned char k);
void disp_east(unsigned char k);
void disp_west(unsigned char k);
void disp_south(unsigned char k);

void set_north();
void set_south();
void set_west();
void set_east();
void time_set();
void get_time();


void disp_min(unsigned char m);
void disp_hour(unsigned char n);
void disp_time(unsigned char m,n);
void set_time(unsigned char Sc,Mn,Hr);
void load();
void send_data_rom(unsigned char add,v1);
void read_data_rom(unsigned char addr);

////////***************************************************************************************

void delay(unsigned int count)
{
int i,j;
for(i=0;i<count;i++) // 100 ====> 1.5s && 1000 ====> 15s
for(j=0;j<200;j++);
}

//******************************************************************************//

void disp_north(unsigned char k)
{
unsigned char x,x1,x2;

x = k/100; //054 ===> 000
k = k%100; // 54
x1 = k/10; // 05
x2 = k%10; // 04

P0 = (0x60|x);
delay(5);
P0 = (0xE0|x1);
delay(5);
P0 = (0xF0|x2);
delay(5);
}

//******************************************************************************//

void disp_east(unsigned char k)
{
unsigned char x,x1,x2;

x = k/100; //054 ===> 000
k = k%100; // 54
x1 = k/10; // 05
x2 = k%10; // 04

P0 = (0xC0|x);
delay(5);
P0 = (0xD0|x1);
delay(5);
P0 = (0x80|x2);
delay(5);

}

//******************************************************************************//

void disp_west(unsigned char k)
{
unsigned char x,x1,x2;

x = k/100; //054 ===> 000
k = k%100; // 54
x1 = k/10; // 05
x2 = k%10; // 04

P0 = (0x70|x);
delay(5);
P0 = (0x40|x1);
delay(5);
P0 = (0x50|x2);
delay(5);

}

//*********************************************************************************//

void disp_south(unsigned char k)
{
unsigned char x,x1,x2;

x = k/100; //054 ===> 000
k = k%100; // 54
x1 = k/10; // 05
x2 = k%10; // 04

P0 = (0x30|x);
delay(5);
P0 = (0x10|x1);
delay(5);
P0 = (0x20|x2);
delay(5);

}

//********************************************************************************//

void disp_min(unsigned char m)
{
unsigned char min1;

min1 = m/10;
m = m%10;

P0 = (0xA0|min1);
delay(3);
P0 = (0x00|m);
delay(3);
}

void disp_hour(unsigned char n)
{
unsigned char hour1;

hour1 = n/10;
n = n%10;

P0 = (0x90|hour1);
delay(3);

P0 = (0xB0|n);
delay(3);

}

//*********************************************************************************//



void disp_time(unsigned char m,n)
{
unsigned char min1,hour1;

min1 = m/10;
m = m%10;

hour1 = n/10;
n = n%10;

P0 = (0x90|hour1);

P0 = (0xB0|n);




P0 = (0xA0|min1);

P0 = (0x00|m);



}

//*********************************************************************************//

void set_south()
{
unsigned char set_value_south=0;

while(1)
{
if(INC==0)
{
delay(100);
set_value_south=set_value_south+1;
disp_south(set_value_south);
if(set_value_south==257)set_value_south=0;
}
if(DEC==0)
{
delay(100);
set_value_south=set_value_south-1;
disp_south(set_value_south);
if(set_value_south==0)set_value_south=256;
}
if(OK==0)
{
delay(400);
South_green = set_value_south;

disp_north(North_green);
disp_east(East_green);
disp_west(West_green);
disp_south(South_green);
send_data_rom(0x06,0x00);
delay(10);
send_data_rom(0x06,South_green);
load();
get_time();

}
}
}

//******************************************************************************//

void set_west()
{
unsigned char set_value_west=0;

while(1)
{
if(INC==0)
{
delay(100);
set_value_west=set_value_west+1;
disp_west(set_value_west);
if(set_value_west==257)set_value_west=0;
}
if(DEC==0)
{
delay(100);
set_value_west=set_value_west-1;
disp_west(set_value_west);
if(set_value_west==0)set_value_west=256;
}
if(OK==0)
{
delay(400);
West_green = set_value_west;

disp_north(North_green);
disp_east(East_green);
disp_west(West_green);
disp_south(South_green);
send_data_rom(0x05,0x00);
delay(10);
send_data_rom(0x05,West_green);
set_south();
}
}
}
//******************************************************************************//

void set_east()
{unsigned char set_value_east=0;

while(1)
{
if(INC==0)
{
delay(100);
set_value_east = set_value_east+1;
disp_east(set_value_east);
if(set_value_east==257)set_value_east=0;
}
if(DEC==0)
{
delay(100);
set_value_east = set_value_east-1;
disp_east(set_value_east);
if(set_value_east==0)set_value_east=256;
}
if(OK==0)
{
delay(400);
East_green = set_value_east;

disp_north(North_green);
disp_east(East_green);
disp_west(West_green);
send_data_rom(0x04,0x00);
delay(10);
send_data_rom(0x04,East_green);
set_west();
}
}

}

//******************************************************************************//

void set_north()
{ unsigned char set_value_north = 0;

while(1)
{
if(INC==0)
{
delay(100);
set_value_north = set_value_north+1;
disp_north(set_value_north);
if(set_value_north==256)set_value_north=0;
}
if(DEC==0)
{
delay(100);
set_value_north = set_value_north-1;
disp_north(set_value_north);
if(set_value_north==0)set_value_north=256;
}
if(OK==0)
{
delay(400);
North_green = set_value_north;
disp_north(North_green);
disp_east(East_green);
send_data_rom(0x03,0x00);
delay(10);
send_data_rom(0x03,North_green);
set_east();
}
}
}



//******************************************************************************//

void time_set()
{
unsigned char min=0,hour=0;
while(1)
{
if(INC==0)
{
delay(100);
hour=hour+1;
disp_hour(hour);
if(hour==0x18)hour=0; //for hour - 18;
}
if(DEC==0)
{
delay(100);
hour=hour-1;
disp_hour(hour);
if(hour==0xFF)hour=0x18;
}
if(OK==0)
{
delay(400);
send_data_rom(0x01,0x00);
delay(10);
send_data_rom(0x01,hour);

while(1)
{

if(INC==0)
{
delay(100);
min=min+1;
disp_min(min);
if(min==0x3D)min=0;
}
if(DEC==0)
{
delay(100);
min = min-1;
disp_min(min);
if(min==0xff)min=0x3D;
}
if(OK==0)
{
delay(400);
send_data_rom(0x02,0x00);
delay(10);
send_data_rom(0x02,min);
disp_min(min);
disp_hour(hour);
set_north();
}
}
}
}
}

//*****************************************************

void read_data_rom(unsigned char addr)
{
start_rom();

send_byte_rom(0xA0);
aknowledge_rom();

send_byte_rom(addr);
aknowledge_rom();

start_rom();

send_byte_rom(0xA1);
aknowledge_rom();

value1 = read_byte_rom();
aknowledge_rom();

stop_rom();
}

//*****************************************************

void send_data_rom(unsigned char add,v1)
{
start_rom();

send_byte_rom(0xA0);
aknowledge_rom();

send_byte_rom(add);
aknowledge_rom();

send_byte_rom(v1);
aknowledge_rom();

stop_rom();
}

//******************************************************************************//

void load()
{unsigned char hr1,min1;
read_data_rom(0x01);
hr1 = value1;
read_data_rom(0x02);
min1 = value1;
if((hr1==Hr)&&(min1==Mn))
{
read_data_rom(0x03);
north = value1;
read_data_rom(0x04);
east = value1;
read_data_rom(0x05);
west = value1;
read_data_rom(0x06);
south = value1;
}
if(Hr==0x08)
{
north = 0x45;
south = 0x40;
west = 0x35;
east = 0x30;
}
}


//******************************************************************************//

void get_time()
{
while(1)
{
start();

send_byte(0xd0);
aknowledge();

send_byte(0x00);
aknowledge();

start();

send_byte(0xd1);
aknowledge();

Sc = read_byte();
aknowledge();

Mn = read_byte();
aknowledge();

Hr = read_byte();
aknowledge();
stop();

disp_time(Mn,Hr);

load();

if(SET==0)time_set();
}
}



//******************************************************************************//


void ext() interrupt 0
{


if(north>0)
{
north = north-1;
disp_north(north);
}
if(north==0)
{
if(east>0)
{
east = east-1;
disp_east(east);
}
if(east==0)
{
if(west>0)
{
west = west-1;
disp_west(west);
}
if(west==0)
{
if(south>0)
{
south = south-1;
disp_south(south);
if(south==0)c=1;
}
if(south==0)
{
load();

}
}
}
}


}
//******************************************************************************//
void set_time(unsigned char Sc,Mn,Hr)
{
unsigned char conreg = 0x90;
start();

send_byte(0xd0);
aknowledge();

send_byte(0x00);
aknowledge();

send_byte(Sc);
aknowledge();

send_byte(Mn);
aknowledge();

send_byte(Hr);
aknowledge();

send_byte(0x00);
aknowledge();

send_byte(0x01);
aknowledge();

send_byte(0x01);
aknowledge();

send_byte(0x01);
aknowledge();

send_byte(conreg);
aknowledge();

stop();
}
//******************************************************************************//
//
//
void main()
{
P0 = 0x00;
P1 = 0x0f;
P2 = 0x00;

IE = 0x81; //enabling the global interrupt and INT0
IT0 = 1; //
TCON = 0x01; // falling edge interrupt enabled



N_G = 0;
E_G = 0;
W_G = 0;
S_G = 0;

N_R = 0;
E_R = 0;
W_R = 0;
S_R = 0;

N_Y = 0;
E_Y = 0;
W_Y = 0;
S_Y = 0;


P0 = 0x60;
delay(100);
P0 = 0xE1;
delay(100);
P0 = 0xF2;
delay(100);
P0 = 0xC3;
delay(100);
P0 = 0xD4;
delay(100);
P0 = 0x85;
delay(100);
P0 = 0x76;
delay(100);
P0 = 0x47;
delay(100);
P0 = 0x58;
delay(100);
P0 = 0x39;
delay(100);
P0 = 0x10;
delay(100);
P0 = 0x21;
delay(100);
P0 = 0x92;
delay(100);
P0 = 0xB3;
delay(100);
P0 = 0xA4;
delay(100);
P0 = 0x05;
delay(100);

set_time(0x50,0x56,0x07);

while(1)
{
get_time();
}
}
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top