Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Duplicate part reference: M00000015 [M00000015]. [Ref(V+)]

Status
Not open for further replies.

Chittadeepan

Newbie
Joined
Nov 5, 2021
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
16
Respected Sir or madam

I am getting duplicate part reference error in the attached proteus file. I have also attached my code to program microcontroller and the expected output plots. Therefore, I request you to kindly correct the simulation errors as soon as possible. Also, suggest me the correction explicitly.

Thank You.
With regards
Chittadeepan Chakrabartty
 

Attachments

  • Digital Lorenz Circuit.zip
    418.9 KB · Views: 56

Chittadeepan

Newbie
Joined
Nov 5, 2021
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
16
Respected sir or madam

I am also attaching a photo of circuit diagram below. In the schematic design, the components are connected by joining wires. In the proteus file, the connections are done by representing through same wire label
 

Attachments

  • devre şema.JPG
    devre şema.JPG
    299.3 KB · Views: 84

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top