Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

driver for uC/OS-II for PIC32 plateforme

Status
Not open for further replies.
B

badrbo

Newbie level 1
Joined
Apr 25, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Tunisia
Activity points
1,286
Hi,

I would like to add some drivers (uart, spi, .. ) to my uC/OS-II for PIC32 plateforme,
Well, can I do this ? if it is possible pleaze help me.

Thanks

Badr
 

Re: driver for uC/OS-II

Yes you can do this but uCOS-II unlike Embedded Linux for example does not require a specific driver interface. So any firmware or driver can be used in conjunction with uCOS-II. A good book for fimrware design is called Embedded Systems Building Blocks written by the same author of uCOS-II is a good starting point for you.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top