Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Dot matrix display programming

Status
Not open for further replies.
imranahmed

imranahmed

Advanced Member level 3
Advanced Member level 3
Joined
Dec 4, 2011
Messages
822
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Location
Karachi,Pakistan
Visit site
Activity points
6,533
Please let me know that how to interface DOT MATRIX DISPLAY to laptop by using serial port or USB and C programming of DOT MATRIX.

Can anyone tell me about that?
 

Ahmed, without appropriated driver between laptop and dot matrix is it not possible to drive this...
 

Do you "driver" mean interface device?.If I program the microcontroller to drive DOT MATRIX DISPLAY ,is it not enough and let me know about theory of operation to drive DOT MATRIX?
 

Can you specify how much rows and columns you need to drive? and is this one or more colors?
 

Any number of rows and columns can be drive i.e 8x8 , 5x7 and so on,please refer for both one color and more color seperately?

:)
 

u need to do multiplexing.....if u want to drive the matrix with few i/o pins of microcontroller. there are many led driver IC's in the market....
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top