Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Do you know what are poles and zeros of the Error amplifier circuitry in SMPS?

Status
Not open for further replies.
T

treez

Guest
Newbie level 1
Hello,
Please could you identify the poles and zeros in this Flyback SMPS Error amplifier set-up, which uses TL431 and opto.? (schematic of SMPS, with TL431/Opto Error amplifier shown)

Basso book on page 292-295 identifies them for an error amplifier circuit that's almost exactly identical as this one , but there is no R4 or C3 in the Basso Error amplifier circuit
(ie R4 is shorted, and C3 not fitted)

LTspice sim of the overall smps (as the schematic) also attached
 

Attachments

  • Flyback _TL431_FLSL_type3.pdf
    18.6 KB · Views: 78
  • Flyback _TL431_FLSL_type3.txt
    9.3 KB · Views: 54
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top