Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

do we need two or more conductors for TEM mode to propagate?

Status
Not open for further replies.
M

mw_rookie

Member level 2
Joined
Mar 13, 2009
Messages
48
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,668
TEM Mode

A basic question...y do we need two or more conductors for TEM mode to propagate?and y can TM and TE modes propagate in a single conductor transmission line like a rectangular waveguide??? If anybody could throw more light, I'd really appreciate it..thx
 

Re: TEM Mode

mw_rookie said:
do we need two or more conductors for TEM mode to propagate?
Click to expand...
Yes.

mw_rookie said:
can TM and TE modes propagate in a single conductor transmission line like a rectangular waveguide???
Click to expand...
No.

TM and TE modes also propagate in transmission line composed of two conductors.
 

Re: TEM Mode

thnx for the reply...but the question was WHY do we need two or more conductors for TEM propagation...and only a single conductor for TM/TE propagation.thx..
 

Re: TEM Mode

1. Do not think about one or two conductors, both are transmission lines.
2. TEM line can transmit DC, TE,TM waveguide is not capable to do so.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top