Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

DIY test leads - source for lead ends?

OpenCedar

Newbie level 6
Joined
May 1, 2022
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
153
Is there a recommendation out there for test lead ends? I'm pretty disappointed at the quality I am getting from random sellers online.

It must be quite common for a lab to need to make a custom lead, where do you go for those pieces so you know they are made of what they say and you can count on it in your results.

Thanks in advance!
 

dick_freebird

Advanced Member level 5
Joined
Mar 4, 2008
Messages
7,803
Helped
2,221
Reputation
4,448
Reaction score
2,159
Trophy points
1,393
Location
USA
Activity points
62,425
If you're talking DMM probes, I have accumulated dozens of
sets over the years and they don't wear out. I've soldered
sewing needles to some, for special-fine poking, etc.

Pomona is a very broad line source for connectors and such,
higher-end quality IMO and priced accordingly (widely avail
at distributors, and on eBay).
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top