moez
Newbie level 6
- Joined
- Jun 30, 2009
- Messages
- 14
- Helped
- 3
- Reputation
- 6
- Reaction score
- 3
- Trophy points
- 1,283
- Location
- Pakistan
- Activity points
- 1,395
hellow
I make VFD using PWM. As I connected load with the circuit, the pulses at the gate of the MOSFETS become distorted which actually the output from the PWM.
I also uses gate driver IC for driving the gate.
can anybody helps in finding out the problem.
I make VFD using PWM. As I connected load with the circuit, the pulses at the gate of the MOSFETS become distorted which actually the output from the PWM.
I also uses gate driver IC for driving the gate.
can anybody helps in finding out the problem.
