What is Ip cores ,how can it replace the verilog/vhdl codes.Can i simulate it using modelsim.Is there any to write or convert them to verilog/vhdl codes .
I am not able to find the IP cores from the xilinx website , could you tell me more appropriate link to the IP codes. But i would prefer help on the verilog codes for DLL rather than the IP cores .
Added after 12 minutes:
Hi,
Can any one tell me how to write codes for the signals shown in the figure ,which i have attached in the topic .Or can any one post the verilog codes in the forum.Its urgent.
.