Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Differntial mode currnts and EM radiation

Status
Not open for further replies.

myatham

Member level 3
Member level 3
Joined
Sep 7, 2009
Messages
58
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
India
Visit site
Activity points
1,746
Hello,

I have read that common mode currents are primarily responsible for most of the radiation problems. Does it mean that differential mode current will cause any issue in radiation point of view?

In radiation susceptibility, will it cause differential current in the design or only common mode currents?

Please help me on this
 

Everything depends on the wave propagation in a given line structure.
If you have a twisted-line cable, then the AC or RF power travels in it using the "differential" mode. If the line is well balanced ad far from any other conductors, it would not radiate. Once there appears a close conductor, common-mode currents are induced in it, and radiation can occur due to it. The only good solution is to surround the twisted-line with a conductive tbe, so nothing can radiate outside.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top