Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Differential matching

Status
Not open for further replies.
S

skrn

Newbie level 1
Joined
Jun 15, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
chennai
Activity points
1,285
How to match differntial output of Transceiver with Balun(Balun SMD pack)

How to match differntial output of PA with Balun (Lumped components)
 

skrn said:
How to match differntial output of Transceiver with Balun(Balun SMD pack).

How to match differntial output of PA with Balun (Lumped components)
Click to expand...

It depends upon what is the impedance that you want to match in order to satisfy MAXIMUM POWER TRANSFER.

So in both the cases it depends upon the Antenna and the receiver impedance(RX SIDE) and the PA output impedance and the antenna(TX SIDE).

Hope this helps..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top