Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Differential CPW Problem (CST MICROWAVE)

Status
Not open for further replies.
B

ballimo

Member level 3
Member level 3
Joined
Jun 30, 2008
Messages
64
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Visit site
Activity points
1,776
Dear All,

I have imported a Differential trace into CST MWS, and I am using "Time Domain Solver" to get S-parameters and TDR measurements; the Problem is that we are getting wrong results.. we have used Polar software and the impedance is 100 Ohm differential.. but the TDR in CST MWS show a 3 Ohm impedance.

I am new to CST MWS, it seems the CST setting are wrong... can you please take a look at the attached file and let me know what's wrong.

Thanks in advance,

Ballimo
 

Attachments

  • PCB.zip
    101.1 KB · Views: 65

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top