Salvador12
Full Member level 4
Hi folks , please help me understand what kind of transformer i got and how many primary turns it needs, I was driving the transformer but after a while it gets hot and it should let more power through.
I will post what I have, the schematic of the smps im using the transformer in and the photos of the transformer itself , mayeb you can help me out telling me what type transformer this is and how many turns it would require on the pirmary.
all i know is this transformer came from an older philips tv set which had a smps power supply, im using the oriignal litz wire found on the transformer but i assume i had too many turns on the primary from athe previous smps i used it in , about 38 turns primary, maybe that caused core saturation and heating.
any help appreciated.
I will post what I have, the schematic of the smps im using the transformer in and the photos of the transformer itself , mayeb you can help me out telling me what type transformer this is and how many turns it would require on the pirmary.
all i know is this transformer came from an older philips tv set which had a smps power supply, im using the oriignal litz wire found on the transformer but i assume i had too many turns on the primary from athe previous smps i used it in , about 38 turns primary, maybe that caused core saturation and heating.
any help appreciated.