Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

designing multistage (multisection) wilkinson power divider

Status
Not open for further replies.

moreho

Member level 1
Joined
Dec 8, 2008
Messages
41
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
1,561
hellow my friends.
i want the design formulas for a multistage (multisection) wilkinson power divider.
can anyone help me and offer me some articles and papers for that ?
explicitly i want to design a 3 stage wilkinson power divider (with inphase outputs).

also can anyone upload or send to me this papers :

L. Young, “Tables for Cascaded Homogeneous Quarter-Wave
Transformers”, IRE Transactions on Microwave Theory and
Techniques, vol. MTT-7, no.4, pp. 233-328, Apr. 1959.

J. Rogers R. and Bhatia, "A 6 to 20 GHz Planar Balun Using a
Wilkinson Divider and Lange Couplers," 1991 IEEE MTT-S
Digest, pp. 865.

Ung-Hee Park and Jong-Sik Lim, "A 700- to 2500-MHz
Microstrip Balun Using A Willkinson Divider and 3-dB
Quadrature Couplers", Microwave and Optical Technology
Letters, vol. 47, no. 4, pp. 333-335, Nov. 2005.

thanks alot.
 

Re: designing multistage (multisection) wilkinson power div

**broken link removed**

This may help.
 
  • Like
Reactions: dorsa

    moreho

    Points: 2
    Helpful Answer Positive Rating

    dorsa

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top