Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Thanks !!
Cn u plz tell me how to design an inductor with the following specifications:
• L = 2 nH (+/- 0.05 nH)
• fc = 2.4GHz
• Minimum fSR = 8 GHz (<<plz tell me what is fsr here? >>>)
• Maximum outer diameter allowed = 250 μm
• Only 45° and 90° lines are allowed
• Maximize Q @ frequency of interest
Cn u plz tell me how to design an inductor with the following specifications:
• L = 2 nH (+/- 0.05 nH)
• fc = 2.4GHz
• Minimum fSR = 8 GHz
• Maximum outer diameter allowed = 250 μm
• Only 45° and 90° lines are allowed
• Maximize Q @ frequency of interest
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.