Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

designing an aerial for a 1 watt radio to operate in the VHF

Status
Not open for further replies.
D

darksky041257

Member level 3
Joined
Jan 5, 2002
Messages
62
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,288
Activity points
398
designing helical aerial

I am interested in designing an aerial for a 1 watt radio to operate in the VHF band.

Is there any software that will allow the aerial to be modelled and matched to the transmitter?
 

helical aerial

type "NEC" or "num electromagn calcul " in GOOGLE.COM and u'll have a lot of the free soft for this.
divan
 

Re: Helical aerial

In CST microwave Studio v4.3 is a example that you have requested.
Best Regard
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top