Design PCI interface chip

[ddanh]

pci interface chip

I want design PCI interface chip (use FPGA) to interface TMS320c6211

I need problem about :
- Document concern PCI and program device driver for windows.
- Steps to design.
- A example design PCI interface chip fully done by verilog HDL
- Some Experience are the most important for design and program
- please give me a profit advise when start, realizing and degub

 

[7rots51]

hello

for driver you can use JUNG*O win*driver and other tools from it.
for PCI core xilini*x and alte*ra have solutions for their chips.

check their site for more info.
bye

 

[drwho78]

Altera has free PCI design for both master and slave. But they are written in AHDL. To get the file, go to the Altera FTP site, under PUB/MISC directory, download the pci302 file.

 

[ze_dib]

You can find a PCI 2.1 compliant bridge @ www.opencore.org.

it has been tested on Xilinx spartan and is coded in Verilog. It is fully compliant with Wishbone SOC bus.

Not too easy to use

Have a Good Time :twisted:

TOTO2001

 

[cube007]

You can find a PCI 2.1 compliant bridge @ www.opencore.org.

It is https://www.opencores.org/

by,
cube007

 

[ddanh]

hi
I very glad when i receive your goodness
Con you tell me address of @ltera has free PCI design for both master and slave ?
Goodbye see you soon

 

[wzdreamer]

there aren't free PCI IPcore from Altera and Xilinx... only evals...

 

[B_A_B_A]

Hi all,

Designing a fully compliant PCI is not easy and should take a lot of time...

If you want to interface your DSP with PCI into an ALTERA FPGA, i suggest you to take a look at PLDA PCI core (it is better than Altera PCI core). :wink: