Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Design of sytstem(consist of Power Supply,Servo Amp & mo

Status
Not open for further replies.

caedrean

Newbie level 6
Newbie level 6
Joined
Jan 13, 2008
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,373
Hi there!

I got a query regarding the designing of the sytstem (consist of Power Supply, Servo Amplifier and Servo Motor) with the existing servo motor with 11A of continuos currentPlease advice whether my assumption is correct or not:

1) Continuous current of Servo Driver >= 11A of continuous current of Servo Motor

2i) Current of Power supply >= Continuous current of Servo DriverOR

2ii) Curremt of Power supply >= 11A of continuous current of Servo Motor.

I'm using:
11A at 80W for the motor, 10A at 500W for the amplifier, and 21A at 48V power supply. Can this work?

Please advice. Thank you.
 

Re: Design of sytstem(consist of Power Supply,Servo Amp &amp

Hi caedrean

What voltage do you aim to run the motor at? (what is it's full rating V, A, W) and does it run fast or slow - is it geared and can the load backdrive?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top