meander inductor microstrip
Hi,
meander inductor in microstrip is not the optimum one as the current flows in oposite direction in paralell lines thus reducing flux and effective inductance. Spiral inductors are much more efficient but require an air bridge to connect inner end of an inductor.
You can model your meander inductor approximately in any circuit simulator than can use model for multiple coupled mixrostrips (MWO, Ansoft Designer, ADS - elements from PCB transmission lines library).
In all programs mentioned you also have model for spiral inductor you can use straight away. You can tham move to layout and use 2.5D or full 3D EM simulator to refine your design.
Hope this helps.
flyhigh