Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

design of Loop filter in all digital fm receiver

Status
Not open for further replies.
S

sasidhar442

Newbie level 3
Joined
Feb 23, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,302
how to design a digital loop filter to be used in a alldigital fm receiver or phase locked loop?
spec:
Here, the system clock
frequency and the sampling frequency are 16MHz = 16,000,000Hz. FM modulation is +-
10KHz at center of 1MHz=1,000,000Hz. The modulation is just +-10% of the 1MHz
carrier frequency..

could you please tell how to design it?? critically needed....8O8O
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top