Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

design of a two-stage broadband low-noise-amplifier (LNA)

Status
Not open for further replies.

MSH

Member level 2
Joined
Dec 8, 2003
Messages
46
Helped
10
Reputation
20
Reaction score
9
Trophy points
1,288
Activity points
409
This report describes the design of a two-stage broadband low-noise-amplifier (LNA) for the frequency range from 3 GHz to 9 GHz, using GaAs MESFETs with an ft of 20 GHz. The passive components were implemented with microstrips. In the frequency band of operation, the achieved noise figure (NF) is within 0. 5 dB from the minimum NF of a single transistor, the power gain is 15 dB, flat within 1 dB, and the maximum input VSWR is lower than 3.
 

**broken link removed**
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top