Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

demodulator using 565

Status
Not open for further replies.
C

Colloid

Newbie level 3
Joined
Apr 28, 2015
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
23
In the pin diagram of ic 565 there is a pin called "demodulated output".
Will this pin really give a demodulated output directly when an FM signal is fed to the ic?
 

pin no 7 is the demodulated signal o/p.
if 565 is connected with proper pll setup , you will get the reqd output.
 

srizbf said:
pin no 7 is the demodulated signal o/p.
if 565 is connected with proper pll setup , you will get the reqd output.
Click to expand...
so we can't directly get a demodulated signal from that pin ?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top