Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Delta-sigma DAC, basic questions and simulation in Simulink

Status
Not open for further replies.

CHL

Member level 3
Member level 3
Joined
Jan 20, 2015
Messages
60
Helped
2
Reputation
4
Reaction score
2
Trophy points
8
Visit site
Activity points
550
Hello

I have some queries about delta-sigma DAC.

1) basically, it is same with delta-sigma ADC, but it consists of digital blocks, such as accumulators. However, how to synchronize the clock with PCM signals from a DSP? Does it need serial communication circuits?

2) I tried to find Simulink simulation example, but there are only ADC examples. Although I simulated simple blocks by myself, there is an error. The input sine wave is converted to PCM signal and the PCM signal goes to delta-sigma DAC. Can you show me an Simulink simulation example?
dac.png

3) Are there any books or papers which explain delta-sigma DAC circuits specifically? I already checked "Understanding delta-sigma data converters(R. Schreier et al)" and "Delta-sigma data converters - Theroy, design, and simulation (S.R. Norsworthy et al), but the books just show blocks. They focus on ADC parts.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top