Degradation of NA in pss+pnoise simulations for LNA

Status
Not open for further replies.

Alex_IC

Full Member level 2
Joined
Jul 2, 2007
Messages
146
Helped
17
Reputation
34
Reaction score
4
Trophy points
1,298
Location
Russia
Activity points
2,058
pss+pnoise for LNA

Hi!
I try to simulate NF for LNA vs input RF power (prf) for a particular freq. My pss+pnoise is:

pss fund=1G harms=20 errpreset=conservative method=gear2only annotate=status

pnoise sweeptype=absolute start=1G lin=50 maxsideband=10 oprobe=PORT1 iprobe=PORT0 refsideband=0 annotate=status

I got NF of 80 dB even at very small prf. The LNA is ok, it has sp NF of 3 dB.

If only I set start=1.1G in my pnoise, I got right NF vs prf about 3 dB with small prf and higher with higher prf.

But what is the reason NF at exact 1 GHz degrade so much with pss+pnoise simulation...?
 

Re: pss+pnoise for LNA

1GHz could be singular for pnoise since 1GHz is fundamental frequency of PSS.
So pnoise result around 1GHz could be less accurate.

Try pnoise with adding parameter "solver=std".
 

Status
Not open for further replies.

Similar threads

Cookies are required to use this site. You must accept them to continue using the site. Learn more…