Hello KlausST,
Agreed, on your answer.
I am terminating Cap to GND plane and another terminal is connected to Vcc pin of IC by trace.
If I am not wrong ultimately inductance created by trace between cap and IC pin is going to create issue. I want to know about that distance. How much is critical.
Suppose for example
Cap's one terminal is on GND plane and another is 50 mil from Vcc pin of any IC. (just for example). I know in that if I am keeping 10mil trace width is better than 5mil of track width. But how can be I assure if I am keeping 10mil of width is ok for 50 mil of distance???