[SOLVED] DDR3 Row, column and bank Address multiplexing

Status
Not open for further replies.
T

tramu

Junior Member level 3
Joined
Jul 5, 2006
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,483
Dear sir,

I have 4Gb x16 DDR3 chip. I want to connect this to a controller which doesn't support 4Gb x16 configuration.
Is it possible to connect 4Gb x16 DDR3 chip to a controller in 2Gb x8 configuration as 2Gb x8 configuration is supported by the controller.

I mean, I will connect only 8 data lines of 4Gb x16 chip to a controller, and results in half capacity of 4Gb x16 will be under utilized(for me it is ok).

4Gb x16-->512MB
4Gb x16 (device in 2Gb x8) --> 256MB.

Which parameter of controller should be considered to support the above configuration(4Gb x16 device (2Gb x8)...

Thanks & Regards,
Thulasi
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…