Willt
Member level 5
Hi friends,
I'm simulating a boost converter in DCM.
The inductor current is supposed to decrease until zero
during the switch is OFF.
However, from my simulation results, the inductor current
drops to -ve values. Why come?? How to solve such problem??
L = 400uH
C = 100nF
R = 3.3k
SW is large enough.
Any comment is highly appreciated.
In the waveform:
green - vdd (always 1.5V)
blue - Vx
pink - inductor current
purple - switch gate voltage
Thanks.
Will
I'm simulating a boost converter in DCM.
The inductor current is supposed to decrease until zero
during the switch is OFF.
However, from my simulation results, the inductor current
drops to -ve values. Why come?? How to solve such problem??
L = 400uH
C = 100nF
R = 3.3k
SW is large enough.
Any comment is highly appreciated.
In the waveform:
green - vdd (always 1.5V)
blue - Vx
pink - inductor current
purple - switch gate voltage
Thanks.
Will